Doll skirt

Everyone had dolls in their childhood. It's safe to say that everyone enjoyed doing clothes for your dolls. Sewing clothes is not only a great distraction and pleasure, but also develops design talents and makes a significant treasure in a child's pleasant play. Let's find out how you can sew a miniature skirt with your own hands.

How to sew a skirt for a doll

• To begin with, you need to cut strips that are suitable in width and length from the fabric, which in the future will be the skirt itself. It is imperative to make allowances (about 1 cm).

• The fabric of the bottom layer is slightly hemmed.

• Now you need to make neat and beautiful folds. To do this, the two strips are folded and aligned at the top edge. Do not forget to make sure that everything below is proportional. Then you need to step back a little from the top edge and sew the fabric with wide stitches. To get an "accordion" - pull loose threads at the sides.

• Next, we try on what happened on the doll and adjust the width of the outfit.
• To make the skirt look very beautiful, you can make a belt. It will need quite a bit of fabric, which should be bent so that it covers the seams at the top and stitches.
• We again arrange a fitting, and measure out the place where the product will need to be stitched. You need to be very careful not to crawl anything. At the end, cut the threads and that's it, the skirt for the doll is ready!

How to sew a skirt for a barbie doll

A skirt for a barbie is sewn according to the same principle as indicated in the article above. But to make it more suitable for the figure of the doll, you will need to sew an elastic band to the belt on top. If the fabric is very thin, another piece can be sewn on. At the top and bottom, the skirt is sewn with any seams (optional). The elastic must be hidden under the fabric, turned the skirt inside out and stitched, stepping back a centimeter. The outfit is ready!

How to sew a skirt for a monster high doll

In order to sew a skirt for a monster high, you need to prepare a fabric of a suitable color.

• The pattern is transferred to the fabric and cut out with a margin. The edges are folded and sewn neatly. You can add a belt, make a cut, which must be sewn. Everything is tried on on the doll, the width is adjusted, the seams are overlaid.

You can decorate the skirt with decorative sequins, beads, beads or buttons.

How to sew a tulle skirt for a doll

• The secret lies in the fact that you don't have to sew a tulle skirt, a few rivets, and that's it, the outfit is ready.

• A small piece of elastic is wrapped around the doll's waist and the ends are sewn together.

• The tulle strips are cut into the length that you want to see on the doll. The width depends on how fluffy the skirt should be. It is best to use soft tulle. The tulle strips are folded over an elastic band and tied behind it. All the stripes are tied very closely to create a fluffy and beautiful skirt.

Such a skirt will look great with beads that can be embroidered in a chaotic manner along the entire length.

How to crochet a skirt for a doll

You need to start crocheting a skirt directly from the frill. You need to dial about forty loops and start knitting according to any chosen pattern, adhering to all instructions. The thread does not need to be cut if you are making a skirt in several colors, just tie the ends of the previous yarn with the new one, so you can avoid unnecessary tails.

We begin to knit one row of sirloin mesh (20 cells each). When knitting 2 rows, an extension is made for every second cell (30 each). Several more rows of the mesh are knitted (usually 3 rows). When you get to row 5, you can start knitting a frill for the skirt. On the 6th row, an expansion is made into every 5th cell (36 cells are obtained). Up to the 9th row, everything is knitted like a sirloin mesh, and a frill is made on the 10th row. It turns out a beautiful skirt with flounces.

How to knit a skirt for a doll

In order to knit a skirt for a doll with knitting needles, you need to select the threads of the desired color. If a tight-fitting standard skirt is knitted, then the threads must be hidden from the seamy side.

The thread cannot be cut, but you just need to continue to knit further. In order for the skirt to look more beautiful, you need to make a frill. It should be airy, very light and soft to the touch. For this, the skein that remains is dissolved into two threads. Part of the thread is cut off, and from the second, loops are drawn along the holes (edging), which are located at the bottom of the skirt. All this is done on 4 knitting needles.

Do not forget that everything original is simple!

How to weave a skirt for a doll from rubber bands

To weave a rubber skirt, you need a machine. First you need to put on the elastic bands from one column to the second, turning them with an eight. The next row is dressed without a figure eight. Crochet them to the center. This should be followed throughout the whole circle. If the doll is small, it is advisable to do about 8 rows of different colors. You need to secure the elastic bands that stick out on the right side. They are removed and must be put on the first column.

In those elastic bands that have just been put on, a hook is inserted and the 2 lowest ones are pulled out, they must be threaded onto the next column. This operation is done around the entire circle. Do not forget that the elastic from the last column must be put on the first and secured. That's it, a colorful and funny elastic skirt for a doll is ready!

How to sew a skirt for a doll: video